--- title: "PE Tubing" canonical: "https://yuannaitube.com/products/pe-tubing/" language: "en-US" --- ![PE Tubing]() [PE]() # PE Tubing PE polyethylene tubing for ambient-temperature water and compressed air. 14 models from 2.5 x 4 mm to 12 x 16 mm and 1/8″ to 1/2″, in 100 m or 200 m rolls. [Request a Quote]() [Download PDF]() [Review specifications ↓]() PRODUCT OVERVIEW ## Product overview Polyethylene air tubing, also described as pneumatic **polyethylene tubing**, is the PE family shown on this page. Compare ID and OD in the model table and confirm the fitting, medium and operating conditions for the selected model. ### Key features - #### Virgin polyethylene 100% virgin polyethylene with no recycled or reprocessed material added (data sheet). - #### Water and compressed air Listed for ambient-temperature water and compressed air. Drinking-water and food-contact applications are reviewed separately. - #### Colors and marking Milky white, dark blue, black, green and yellow; custom colors available. Brand logos, model identification and continuous meter markings can be customized. - #### Temperature range Air: -10°C to +50°C; Water: 0°C to +55°C; freezing is not permitted - #### Working pressure 3 bar (56 psi) – 8 bar (116 psi) at 23°C, depending on the model (data sheet). Burst pressure is not **working pressure**. - #### Sizes 10 listed models, outside diameter 4–16 mm. Inch sizes are listed where the data sheet gives them. ![Tubing extrusion and coiling line in the Hefei factory]() ### How the tubing is made and checked Tubing is produced on extrusion and coiling lines and checked with dimensional, pressure-hold, burst-pressure and tensile equipment listed in the company inventory. Product requirements are reviewed against the drawing and order. 1. **Incoming**Check supplier documents, material identity, specification, quantity and packaging. 2. **In process**Drawing and route-sheet revision checks, measurement-equipment status and **inspection records**. 3. **Finished tubing**Identity, surface and tube-end condition, dimensions, marking, cleanliness and packaging. [Review quality documentation →]() [About the factory →]() ### Supply terms - #### MOQ Standard specifications: 500 m per specification. Custom specifications: from 3,000 m per specification. - #### Lead time Standard product: 5–12 working days. Custom product: 10–20 working days. Lead time starts after the technical specification is confirmed and the agreed payment is received. - #### Samples Standard specifications: 1–3 m. Sample fee and shipping are paid by the customer; the sample fee can be credited against the first bulk order within 6 months, shipping is not credited. Final MOQ and lead time are confirmed by material, specification, color, packaging and order quantity. [Request samples →]() Selection notes and conditions ### Selection at a glance - **Product family:** **PE Tubing**. - **Media / application scope in the supplied data sheet:** Ambient-temperature water and compressed air. - **Dimensions:** select ID, OD and the stated model values from the table below. - **Inquiry details:** include model, dimensions, quantity, fittings and the intended operating conditions. ### Match the tubing to the connection Provide fitting dimensions, the intended installation and any external exposure. Compatibility is confirmed per fluid, and drinking-water use is reviewed separately. ### Pressure and temperature conditions Pressure and temperature ratings are listed separately; send your operating point for a combined-condition check. **Working pressure** is the design rating; burst pressure is a test value. Confirm the model-specific limits, test conditions and complete fitting assembly before use. ### Related selection information [PU tubing →]() . ### What is polyethylene tubing? Polyethylene is the material family represented by the PE range on this page. **Polyethylene tubing** sizes should state ID, OD and units. Confirm the material grade required by your project rather than assuming a density grade or an approval for drinking-water, food or medical service. ### Prepare a complete PE tubing inquiry Include the selected model, quantity, length, fittings and actual medium. Use our [dimension guide]() and [fluid-transfer review]() to identify missing information. [Request model-specific technical documents →]() TECHNICAL DATA ## Specifications & available sizes Specifications: TDS-PE-2026-V1. Model designations and table values below follow the 2026 technical data sheet for this product. Dimensions and pressure tables are specified at 23°C. Pressure values are in bar (psi) as stated in the data sheet. **Working pressure** is the design rating and burst pressure is a test value; pressure and temperature ratings are listed separately, so send your operating point for a combined-condition check. Tolerance, metric/inch size system and, where applicable, layer construction are identified in each row. Physical properties are reference values from the data sheet; test methods and application-specific compliance are reviewed against your requirements. Technical specifications | Media / application scope (supplied data sheet) | Ambient-temperature water and compressed air. | | --- | --- | | Density | Approx. 0.920 g/cm³ | | Melt mass-flow rate (MFR) | Approx. 2.0 g/10 min | | Tensile stress at yield | Approx. 10 MPa | | Tensile stress at break | Approx. 16 MPa | | Elongation at break | Approx. 750% | | Air-service temperature range | -10°C to +50°C | | Water-service temperature range | 0°C to +55°C; freezing is not permitted | | Standard colors / packaging | Standard colors: milky white, dark blue, black, green and yellow (custom colors available). Example of meter-marked printing: AIR PASSAGE PE 8X5 001M. Customer brand logos, model identification and continuous meter markings can be customized. Packaging: stretch-film wrapping. | Find a model or dimension Size specifications at 23°C — pressure: bar (psi), source values | Model / nominal inch size | ID (mm) | OD (mm) | Standard roll length (m) | Working pressure at 23°C | Burst pressure at 23°C | Bend radius (mm) | Size system / tolerance / construction | | --- | --- | --- | --- | --- | --- | --- | --- | | YN-PE 0425 | 2.5 | 4.0 | 200 | 6 bar (87 psi) | 18 bar (261 psi) | 20 | Metric \| Tolerance: ±0.10 mm | | YN-PE 0640 | 4.0 | 6.0 | 200 | 6 bar (87 psi) | 18 bar (261 psi) | 30 | Metric \| Tolerance: ±0.10 mm | | YN-PE 0850 | 5.0 | 8.0 | 100 | 7 bar (113 psi) | 15 bar (227 psi) | 40 | Metric \| Tolerance: ±0.10 mm | | YN-PE 0855 | 5.5 | 8.0 | 100 | 5 bar (73 psi) | 15 bar (218 psi) | 45 | Metric \| Tolerance: ±0.10 mm | | YN-PE 0860 | 6.0 | 8.0 | 100 | 6 bar (99 psi) | 17 bar (256 psi) | 50 | Metric \| Tolerance: ±0.10 mm | | YN-PE 1065 | 6.5 | 10.0 | 100 | 6 bar (87 psi) | 18 bar (261 psi) | 50 | Metric \| Tolerance: ±0.10 mm | | YN-PE 1080 | 8.0 | 10.0 | 100 | 4 bar (71 psi) | 14 bar (213 psi) | 75 | Metric \| Tolerance: ±0.10 mm | | YN-PE 1280 | 8.0 | 12.0 | 100 | 5 bar (85 psi) | 13 bar (199 psi) | 60 | Metric \| Tolerance: ±0.10 mm | | YN-PE 1410 | 10.0 | 14.0 | 100 | 5 bar (73 psi) | 15 bar (218 psi) | 80 | Metric \| Tolerance: ±0.10 mm | | YN-PE 1612 | 12.0 | 16.0 | 100 | 3 bar (56 psi) | 11 bar (170 psi) | 110 | Metric \| Tolerance: ±0.10 mm | | 1/8″ | 1.58 | 3.175 | 200 | 8 bar (116 psi) | 24 bar (348 psi) | 16 | Fractional / inch \| Tolerance: ±0.10 mm | | 1/4″ | 4.35 | 6.35 | 200 | 5 bar (73 psi) | 15 bar (218 psi) | 35 | Fractional / inch \| Tolerance: ±0.10 mm | | 3/8″ | 6.35 | 9.525 | 100 | 6 bar (87 psi) | 18 bar (261 psi) | 50 | Fractional / inch \| Tolerance: ±0.10 mm | | 1/2″ | 9.60 | 12.70 | 100 | 4 bar (58 psi) | 12 bar (174 psi) | 80 | Fractional / inch \| Tolerance: ±0.10 mm | DOCUMENTATION ## Technical downloads ## Related guides - [Tubing dimensions: ID, OD and wall thickness]() - [Pressure and temperature: information for tubing selection]() ## Application considerations - [### Tubing for Chemical & Industrial Fluid Handling Review FEP and PFA tubing for chemical and industrial fluid lines, with PE, polyether and composite as conditional candidates. Prepare medium, concentration and operating conditions.]() - [### Tubing for Cleaning Equipment & Industrial Water Lines Review polyether and PE tubing for cleaning-liquid, industrial-water and air lines. Send the liquid, concentration, temperature and pressure.]() QUESTIONS ## Product FAQ Does the PE tubing listing establish drinking-water approval? No drinking-water or food-contact approval is established by this product listing. Request the relevant model-specific evidence when your project requires it. Which connections should I identify for PE tubing? Provide the fitting type, interface dimensions and assembly requirements alongside tube ID, OD and tolerance. Confirm the selected combination before procurement. Which polyethylene tubing sizes are needed for a pneumatic connection? Specify ID, OD, units and tolerance, then identify the fitting interface, length, quantity and operating conditions. For polyethylene air tubing, confirm the selected PE model and material grade. Drinking-water, food-contact and medical applications are reviewed separately. ## Let’s Discuss Your Tubing Requirements. Looking for a standard size or a custom specification? Send us the details, and we will review the available options with you. We store your inquiry to respond to your request. Read our [privacy notice]() . RELATED PRODUCTS ## Explore more tubing ![PA6 Nylon Tubing]() [PA6]() ### PA6 Nylon Tubing PA6 nylon tubing for fixed pneumatic, oil and fuel lines. 14 models from 2.5 x 4 mm to 12 x 16 mm and 1/8″ to 1/2″, in 100 m or 200 m rolls. [View details →]() ![PA12 Nylon Tubing]() [PA12]() ### PA12 Nylon Tubing PA12 nylon tubing for pneumatic, hydraulic-oil and fuel lines. 14 models from 2.5 x 4 mm to 12 x 16 mm and 1/8″ to 1/2″, in 100 m or 200 m rolls. [View details →]() ![Polyether Tubing]() [Polyether PU]() ### Polyether Tubing Polyether (ether-based) polyurethane tubing for air, water and cleaning-liquid lines. 14 models from 2.5 x 4 mm to 12 x 16 mm and 1/8″ to 1/2″, in 100 m or 200 m rolls. [View details →]() ![PU Tubing]() [PU]() ### PU Tubing PU tubing for compressed-air, inert-gas and vacuum lines. 15 models from 2.5 x 4 mm to 12 x 16 mm and 1/8″ to 3/4″, in 100 m or 200 m rolls. [View details →]()