--- title: "Polyether Recoil Tubing" canonical: "https://yuannaitube.com/products/polyether-recoil-tubing/" language: "en-US" --- ![Polyether Recoil Tubing]() [Polyether PU]() # Polyether Recoil Tubing Polyether recoil tubing: coiled ether-based polyurethane tubing for air, water and oil lines. 17 models, 3.17 to 19.05 mm OD. State coil geometry and working reach. [Request a Quote]() [Review specifications ↓]() PRODUCT OVERVIEW ## Product overview The listed **polyether recoil tubing** family uses a coiled format. For a coiled **polyether polyurethane tubing** **inquiry**, state the material grade, tube ID and OD, coil geometry and required working reach. Confirm the material designation and model-specific operating conditions before ordering. ### Key features - #### Media in the data Air, water, oil - #### Temperature range -30~+60℃ - #### Sizes 17 listed models, outside diameter 3.2–19.1 mm. Inch sizes are listed where the data sheet gives them. ![Tubing extrusion and coiling line in the Hefei factory]() ### How the tubing is made and checked Tubing is produced on extrusion and coiling lines and checked with dimensional, pressure-hold, burst-pressure and tensile equipment listed in the company inventory. Product requirements are reviewed against the drawing and order. 1. **Incoming**Check supplier documents, material identity, specification, quantity and packaging. 2. **In process**Drawing and route-sheet revision checks, measurement-equipment status and **inspection records**. 3. **Finished tubing**Identity, surface and tube-end condition, dimensions, marking, cleanliness and packaging. [Review quality documentation →]() [About the factory →]() ### Supply terms - #### MOQ Standard specifications: 500 m per specification. Custom specifications: from 3,000 m per specification. - #### Lead time Standard product: 5–12 working days. Custom product: 10–20 working days. Lead time starts after the technical specification is confirmed and the agreed payment is received. - #### Samples Standard specifications: 1–3 m. Sample fee and shipping are paid by the customer; the sample fee can be credited against the first bulk order within 6 months, shipping is not credited. Final MOQ and lead time are confirmed by material, specification, color, packaging and order quantity. [Request samples →]() Selection notes and conditions ### Selection at a glance - **Product family:** **Polyether Recoil Tubing**. - **Medium listed in the supplied data:** Air, water, oil; confirmation against the exact service conditions is required. - **Dimensions:** select ID, OD and the stated model values from the table below. - **Inquiry details:** include model, dimensions, quantity, fittings and the intended operating conditions. ### Separate material and coil confirmation Specify the material designation, coil arrangement, working reach and connections. Do not infer fatigue life or fluid compatibility from the recoil form or the polyether name. ### Pressure and temperature conditions Pressure and temperature ratings are listed separately; send your operating point for a combined-condition check. **Working pressure** is the design rating; burst pressure is a test value. Confirm the model-specific limits, test conditions and complete fitting assembly before use. ### Related selection information [Polyether straight tubing →]() . [Request model-specific technical documents →]() TECHNICAL DATA ## Specifications & available sizes General values and individual size values are listed separately. Pressure and temperature ratings are listed separately; **working pressure** is the design rating and burst pressure is a test value. Media compatibility depends on concentration, temperature and service conditions. Lengths listed below are tube supply / coil lengths, not recoil extension lengths. Spiral diameter, number of turns, usable extension and fittings are confirmed on request. The source parameter sheet uses the term polyester while the product title states polyether; confirm the exact material grade for your order. Technical specifications | Product | Polyether Recoil Tubing | | --- | --- | | General working pressure (source value) | 5-8kg/cm² | | Media (confirm compatibility) | Air, water, oil | | Tear strength (source value) | 110kg/cm² | | Abrasion loss (source value) | 30mg~40mg | | General supply length | 100m/200m | | Temperature range (source value) | -30~+60℃ | | Diameter tolerance | ±0.05mm | | Tensile strength (source value) | 600kg/cm² | | General burst pressure (temperature unspecified) | 30kg/cm² | Find a model or dimension Size specifications — pressure: kgf/cm²; blank values: not supplied | Model | ID (mm) | OD (mm) | Length (m) | Working pressure | Burst (temperature unspecified) | Burst at 20°C | Burst at 60°C | Bend radius (mm) | Notes | | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | | ZX-0425 | 2.5 | 4 | 200 | 10 kgf/cm² | — | 38 kgf/cm² | 21 kgf/cm² | 10 | — | | ZX-0530 | 3 | 5 | 200 | 10 kgf/cm² | — | 37 kgf/cm² | 21 kgf/cm² | 12 | — | | ZX-0640 | 4 | 6 | 200 | 10 kgf/cm² | — | 31 kgf/cm² | 17 kgf/cm² | 15 | — | | ZX-0850 | 5 | 8 | 100 | 10 kgf/cm² | — | 32 kgf/cm² | 19 kgf/cm² | 19 | — | | ZX-0855 | 5.5 | 8 | 100 | 8 kgf/cm² | — | 28 kgf/cm² | 16 kgf/cm² | 20 | — | | ZX-0860 | 6 | 8 | 100 | 6 kgf/cm² | — | 21 kgf/cm² | 11 kgf/cm² | 21 | — | | ZX-1065 | 6.5 | 10 | 100 | 10 kgf/cm² | — | 31 kgf/cm² | 18 kgf/cm² | 25 | — | | ZX-1075 | 7.5 | 10 | 100 | 8 kgf/cm² | — | 26 kgf/cm² | 15 kgf/cm² | 35 | — | | ZX-1280 | 8 | 12 | 100 | 10 kgf/cm² | — | 31 kgf/cm² | 17 kgf/cm² | 37 | — | | ZX-1410 | 10 | 14 | 100 | 8 kgf/cm² | — | 20 kgf/cm² | 11 kgf/cm² | 56 | — | | ZX-1612 | 12 | 16 | 100 | 8 kgf/cm² | — | 17 kgf/cm² | 10 kgf/cm² | 60 | — | | ZX-1613 | 13 | 16 | 100 | 6 kgf/cm² | — | 24 kgf/cm² | 14 kgf/cm² | 60 | — | | ZX-1/8" | 1.58 | 3.17 | 200 | 10 kgf/cm² | — | 43 kgf/cm² | 24 kgf/cm² | 8 | — | | ZX-3/4" | 15.88 | 19.05 | 100 | 10 kgf/cm² | — | 35 kgf/cm² | 19 kgf/cm² | 60 | — | | ZX-1/4" | 4.35 | 6.35 | 200 | 10 kgf/cm² | — | 34 kgf/cm² | 15 kgf/cm² | 15 | — | | ZX-3/8" | 6.35 | 9.52 | 100 | 8 kgf/cm² | — | 31 kgf/cm² | 17 kgf/cm² | 21 | — | | ZX-1/2" | 9.6 | 12.7 | 100 | 8 kgf/cm² | — | 34 kgf/cm² | 17 kgf/cm² | 45 | — | DOCUMENTATION ## Technical downloads ## Related guides - [Pneumatic Tubing Bend Radius: A Routing Checklist]() - [Tubing dimensions: ID, OD and wall thickness]() - [Pressure and temperature: information for tubing selection]() ## Application considerations - [### Tubing for Cleaning Equipment & Industrial Water Lines Review polyether and PE tubing for cleaning-liquid, industrial-water and air lines. Send the liquid, concentration, temperature and pressure.]() QUESTIONS ## Product FAQ How do I specify coiled polyether polyurethane tubing? State the required material grade, tube ID and OD, coil diameter, turn count, straight ends, fittings and usable working reach. The size table does not define the complete coil assembly. Confirm the polyether or polyester source designation and the model-specific operating conditions. How should I specify the material for polyether recoil tubing? State the required material grade and request matching documentation. Can I infer recoil durability from the polyether product name? Fatigue and movement-cycle results depend on the model and the assembly. Define travel, routing, temperature and acceptance requirements before sample evaluation. ## Let’s Discuss Your Tubing Requirements. Looking for a standard size or a custom specification? Send us the details, and we will review the available options with you. We store your inquiry to respond to your request. Read our [privacy notice]() . RELATED PRODUCTS ## Explore more tubing ![PA6 Nylon Tubing]() [PA6]() ### PA6 Nylon Tubing PA6 nylon tubing for fixed pneumatic, oil and fuel lines. 14 models from 2.5 x 4 mm to 12 x 16 mm and 1/8″ to 1/2″, in 100 m or 200 m rolls. [View details →]() ![PA12 Nylon Tubing]() [PA12]() ### PA12 Nylon Tubing PA12 nylon tubing for pneumatic, hydraulic-oil and fuel lines. 14 models from 2.5 x 4 mm to 12 x 16 mm and 1/8″ to 1/2″, in 100 m or 200 m rolls. [View details →]() ![Polyether Tubing]() [Polyether PU]() ### Polyether Tubing Polyether (ether-based) polyurethane tubing for air, water and cleaning-liquid lines. 14 models from 2.5 x 4 mm to 12 x 16 mm and 1/8″ to 1/2″, in 100 m or 200 m rolls. [View details →]() ![PU Tubing]() [PU]() ### PU Tubing PU tubing for compressed-air, inert-gas and vacuum lines. 15 models from 2.5 x 4 mm to 12 x 16 mm and 1/8″ to 3/4″, in 100 m or 200 m rolls. [View details →]()